Explosion proof gas station lamps: the core of the petrol station safety lighting to get the programme

First, Explosion proof gas station lamps in the petrol station fundamental application scenarios

Petrol filling station as a mixture of oil and gas high-risk environment, the safety and reliability of lighting equipment requires a very high.

Explosion proof gas station lamps are designed for flammable and explosive places, widely used in the following core areas:

1. Petrol dispenser operation area: oil and gas concentration easily reaches the explosion limit, Explosion proof gas station lights are approved for explosion-proof shell [Exd IIB T4 grade] to block the internal arc sparks, to avoid equipment failure triggered by explosion accidents.

2. underground oil storage tanks: humid environment is easy to accumulate combustible gases, equipped with IP68 protection grade explosion-proof station lights can be long-term water immersion, with 316 stainless steel shell to resist hydrogen sulphide corrosion.

3. tanker loading and unloading area: dynamic operations are prone to static electricity, explosion-proof oil station lights using impact polycarbonate lampshade, surface resistance <1 × 10⁹Ω, effectively conductive in addition to static potential.

4. Convenience shops and channel lighting: low-glare design explosion-proof petrol filling station lamps [UGR<19], to enhance night visibility and reduce the risk of driver visual fatigue.

Second. Amasly petrol stations choose Explosion proof gas station lamps five core advantages

1. Intrinsically safe design, to eliminate the risk of explosion Explosion proof gas station lights approved by the international IECEx certification, explosion-proof cavity can withstand the internal 150kPa explosion pressure, to ensure that the oil and gas environment zero accident.

2. strong environmental adaptability temperature range: -40 ℃ ~ +75 ℃, to adapt to the temperature difference between day and night; anti-salt spray test > 1,000 hours, suitable for coastal petrol stations; seismic performance up to 5-15Hz/3mm amplitude, resistance to vehicle vibration.

3 energy efficient, reduce operating costs LED Explosion proof gas station lamps 80W light efficiency of 130 lm / W, compared with the traditional 250W high-pressure sodium lamps, the annual power consumption by 65%, a single station to save more than ¥ 12,000 annual electricity costs.

4. Intelligent control and emergency functions with the aid of microwave sensor dimming, unoccupied automatically reduce power to 30%; built-in lithium iron phosphate battery, power outages continue to illuminate ≥ 3 hours to meet the needs of emergency evacuation.

5, long life and maintenance-free design using ceramic heat dissipation technology, lamps life> 80,000 hours [about 10 years], reduce the frequency of maintenance and manpower costs at high altitude.

Third, Explosion proof gas station lamps selection technical guidelines

Explosion-proof grade: Prefer Exd IIB T4 [national standard] or ATEX Zone 1 certification [EU];

Optical configuration: batwing light distribution [120 ° beam angle] is advocated in the refuelling area, and symmetrical circular light distribution is selected in the tank area;

Material guidelines: the lamps body should meet the IK10 impact resistance level, light transmittance > 90% light transmittance;

Additional features: optional oil mist self-cleaning coating, reducing 90% oil adhesion.

Fourth, the case: coastal petrol station lighting transformation practice

A coastal gas station due to salt spray corrosion caused by traditional lamps and lanterns annual failure rate of more than 40%, replaced by AMASLY ALX-80 Explosion proof gas station lamps:

Lighting uniformity from 0.3 to 0.7, the average illuminance of the refuelling area of 150lx;

lamps shell approved ISO 9227 neutral salt spray test 2000 hours without corrosion;

Annual maintenance costs reduced by 78%, return on investment cycle of only 14 months.

FAQ: Explosion-proof petrol filling station light common problems answer

Q1: Is special approval required for the installation of Explosion proof gas station lamps?

Yes. Need to supply explosion-proof certificates, test reports [such as CNEX/PCEC certification], and to the local safety supervision department for the record before construction.

Q2: How to clean the oil on the surface of the lamps?

It is recommended to use neutral cleaner to wipe the surface, strong acid/alkali solution is prohibited. Some models are equipped with nano oleophobic coating, which can reduce the cleaning frequency by 70%.

Q3: What is the guideline for LED Explosion proof gas station lamps decay?

The industry requires 3000 hours light decay ≤ 3%, quality products [such as AMASLY series] 10000 hours light decay <5%.

Q4：Can I directly replace the old lamps and lanterns in the petrol station renovation?

Need to confirm the original bracket load-bearing and electrical parameters match, advocating the commissioning of professional explosion-proof lighting engineers to carry out on-site surveys.

Produtos relacionados