200W explosion proof street light: a comprehensive guide to industrial lighting safety and efficient lighting

Introduction: Why 200W explosion proof street light is just needed for industrial scenes?

In petrochemical, mining, port warehousing and other high-risk industrial environments, the safety and reliability of lighting equipment is directly related to the lives of people, asset safety. 200W explosion proof street light with its strong explosion proof performance, improved light coverage, energy-saving advantages, into the first choice of industrial outdoor lighting to solve the problem. In this paper, we will analyze the core advantages of 200W explosion proof street light, product type, cost-effectiveness and practical application scenarios, to help you comprehensively solve the value of this fundamental equipment.

First, 200W explosion proof street light four core advantages

1. Intrinsic safety: explosion proof design double guarantee

200W explosion proof street light strictly follow the ATEX/IECEx international explosion proof guidelines, the use of fully sealed die-cast aluminum shell, tempered glass enclosure, to ensure safe operation in flammable and explosive gas environment. Its heat dissipation structure can export the heat of the circuit at high speed, eliminating the risk of explosion caused by high temperature.

2. Energy efficient: LED light source breakthrough performance

Imported LED chip 200W explosion proof street light, luminous efficacy up to 150lm / W or more, than the traditional sodium lamp energy saving 60%. With intelligent dimming system, can further reduce energy consumption, annual operating cost savings of more than 40%.

3. Ultra-long life: industrial-grade durability verification

Approved IP66/IP68 protection level certification, IK10 impact resistance test, and can still work stably in extreme environment from -40℃ to +55℃. The average operating life is up to 50,000 hours, reducing the frequency of equipment replacement.

4. Intelligent control: empowered by Internet of Things (IoT) technology

Integrated light sensor, microwave sensor, 4G remote control system, automatic switching, brightness adjustment, fault warning, to meet the intelligent factory intelligent management needs.

Second, 200W explosion proof street light three mainstream types

1. Classification by material

Cast aluminum explosion proof street light: lightweight design [<15kg], suitable for mobile operating scenes stainless steel explosion proof street light: acid and alkali corrosion resistance, suitable for offshore platforms and other salt spray environment.

2. Classified by light source technology

3. Classified by installation method

Wall-mounted: space-saving, suitable for alleyways, pipe corridors, vertical poles: adjustable height of 3-8 meters, covering a radius of up to 30 meters hanging type: used for centralized lighting under the eaves of the plant.

Third, 200W explosion proof street light price system analysis

1. Cost components

Explosion-proof grade: Ex d IIC T6 level than Ex IIB T4 price 20% -35% higher light source brand: the use of Philips / Osram LED module cost increased by 15% -25% additional features: intelligent control system so that the unit price increased by 30% -50%.

2. 2023 market price reference

Economy: price range of 180-250 dollars / set, warranty period of 3 years

Standard: Price range USD 260-380/set, 5 years warranty.

High-end customized model: price range of $400-600/set, 7 years warranty

3. Lifecycle Cost Comparison

Take 100 street lights in a chemical plant as an example:

Traditional mercury lamps: average annual maintenance cost of $ 12,000, 200W explosion proof LED street lamps: average annual cost of 6,500, 5-year savings of 6,500, 5-year savings of 27,500

Amasly: Focus on industrial explosion-proof lighting, explosion-proof electrical appliances, industrial lamps.

Amasly Lighting is a leading professional lighting company with a focus on quality, efficiency and customer satisfaction, and we offer a comprehensive range of cutting-edge lighting solutions to meet the diverse needs of our customers. We provide strong competitive explosion-proof lamp products.

Fourth, 200W explosion proof street light three classic application cases

Case 1: Middle East oil refining base

Pain point: high temperature + hydrogen sulfide gas environment leads to frequent failure of the lamps and lanterns to fix the program: deployment of 120 sets of stainless steel 200W explosion proof street lamps, equipped with hydrogen concentration sensor linkage system results: failure rate down 90%, the annual maintenance costs reduced by $ 85,000!

Case 2: Chilean copper mine underground mining system

Challenge: Lighting system damage due to tunnel moisture + vibration Implementation: Install 80 sets of seismic 200W explosion proof lamps with anti-vibration mounts and silicone seals Results: Extended equipment life to 7 years, 18% increase in mining operational efficiency

Case 3: China LNG Receiving Terminal

Demand: explosion proof + typhoon + remote monitoring integrated solution: customized 200W explosion proof street lamp integrated wind speed monitoring, emergency lighting module Value: approved API interface access to the central control system, emergency response time reduced to 30 seconds

Fifth, 200W explosion proof street lights common problems authoritative answer

Q1: explosion proof grade Ex d IIC T6 specific meaning?

Technical analysis: Ex means explosion proof certification, d refers to explosion proof, IIC represents the application of hydrogen, acetylene and other high-risk gases, T6 means that the surface temperature ≤ 85 ° C

Q2: 200W explosion proof street light maintenance cycle?

Maintenance claims: every 6 months to clean the optical lens, 2 years to replace the drive power supply, 5 years to implement the overall explosion proof structure testing

Q3：What is the core difference between ordinary industrial and mining lights?

Essential differences: explosion proof street lamps need to be approved 1.5 times the design pressure hydrostatic test, and all the seams width <0.15mm

Q4: How to determine whether explosion proof certification is required?

Risk assessment: According to GB 50058 guidelines, when the explosive gas concentration reaches 25% of the LEL [lowest explosion limit] is required to use the

Conclusion: Select 200W explosion proof street light three decision points

In the stage of Industry 4.0, 200W explosion proof street lamp has been upgraded from a single lighting tool to a fundamental cornerstone facility for safe production. Advocates for procurement focus:

Certification integrity: verification of ATEX / IECEx / CNEx triple certification energy efficiency: choose L70 @ 50,000 hours or more light failure control service network: the priority to explore the supply of 2-hour emergency response service providers

For customized explosion proof lighting solutions or product white papers, please contact our engineering team, we will provide you with professional hazardous area lighting risk assessment and product selection services.

Kapcsolódó termékek