Comprehensive analysis of 80W explosion proof lights: technical parameters, installation and maintenance and purchase guide

1. What is 80W explosion proof lights?

80W explosion proof light is a kind of industrial lighting equipment designed for flammable and explosive environments, adopting high-efficiency LED light source, rated power of 80W, both explosion proof, anti-corrosion, waterproof and other multiple safety features.

It is widely used in petroleum mining, chemical production, electric power facilities, pharmaceutical factories, marine platforms and other hazardous places, approved explosion proof structure, high protection level [IP66] and corrosion-resistant materials, effectively preventing the risk of explosion caused by electric sparks or high temperature.

Compared with traditional lamps and lanterns, 80W explosion proof lamps have significant advantages:

Energy saving and high efficiency: LED luminous efficacy up to 110-150lm / W, than the traditional light source power savings of more than 60%. Long life: average life of 50,000 to 100,000 hours, reducing maintenance costs. Strong environmental adaptability: hold help -40 ℃ to +40 ℃ extreme temperatures, anti-corrosion grade up to WF2, suitable for high humidity, corrosive gas environment.

2. 80W explosion proof lights explosion proof type and material

explosion proof type

According to international standards, 80W explosion proof lamps are mainly divided into the following types:

explosion proof [Exd]: approved to strengthen the shell structure to isolate the internal explosion, suitable for IIA, IIB, IIC class gas environment [such as petrochemical].

Increased safety [Exe]: approved additional safety measures to prevent sparks, commonly used in low-risk areas.

Dust explosion proof: designed for combustible dust environments, such as coal mines and grain processing plants.

Core Material

Shell: Die-cast aluminum alloy with high-pressure electrostatic spray surface treatment, both lightweight and high strength, impact resistance and corrosion resistance.

Lampshade: High borosilicate toughened glass, light transmittance over 91%, can withstand 4J impact, anti-glare design to enhance operational comfort.

Sealing structure: silicone sealing ring and stainless steel fasteners, to ensure IP66 protection level, to prevent water, dust intrusion.

3. 80W explosion proof lights fundamental parameter analysis

Electrical parameters

Voltage: AC220V/50Hz [hold help wide voltage input, compatible with ± 20% fluctuation]. Power factor: ≥0.95, reduce the loss of power grid.

Optical performance

Luminous efficiency: 110-150lm/W, using CREE or Bridgelux LED chips, color rendering index ≥ 80, to ensure high color rendering.

Color temperature: 2800K-6500K, with the help of warm white, white, cold white color temperature options, to adapt to the needs of different scenes.

Safety certification

explosion proof marking: Exd IIC T4/T6 Gb, in line with the highest explosion proof class II gas environment. Temperature rise control: Scale type heat dissipation design, LED junction temperature ≤ 50 ℃, to avoid the risk of high temperature.

4. 80W explosion proof lights installation method

80W explosion proof light holds a variety of flexible installation options to adapt to complex industrial scenarios:

Ceiling-mounted: suitable for fixing on the top of indoor ceiling or pipeline.

Wall-mounted: approved bracket fixed on the wall, for workshop, trestle lighting.

Boom type: with boom hanging, commonly used in oil depots, large warehouses overhead lighting.

Guardrail type/flange type: used for offshore platforms, petrochemical installations and other special structures.

Installation Precautions:

Need to cut off the power supply after the operation, avoid open the cover with electricity 6. cable introduction port using G3/4 thread, matching 8-12mm wire diameter, to ensure the sealing.

5. 80W explosion proof light maintenance and maintenance

Daily maintenance

Clean the lamp body: regularly wipe the lampshade with a soft cloth to avoid oil affecting the light transmittance. Check the seals: check the aging condition of the seals every six months, and replace them quickly to prevent water ingress.6

Trouble shooting

Light source replacement: need to use the same type of LED module, to avoid power mismatch caused by overheating 14. power maintenance: if strobe, check whether the constant current drive power failure, advocate returning to the factory for maintenance .

Warning: the lamps and lanterns need to be cooled to room temperature after power failure before opening the cover to prevent residual high temperature ignition gas.

6. 80W explosion proof light FAQ Answers

Q1: Can 80W explosion proof light be used in outdoor rain and snow environment?

A: Yes. Its IP66 protection grade can resist strong spray water and dust intrusion, suitable for outdoor and wet environment.

Q2：How to deal with the lamps at the end of its life?

A: LED modules can be recycled and do not contain mercury and other harmful substances, in line with environmental requirements.

Q3: How to choose the right color temperature?

4000K-5000K positive white light: suitable for workshops and warehouses, to enhance the clarity of operations.2800K-3500K warm white light: used in control rooms and duty areas, to reduce visual fatigue.

Conclusion

80W explosion proof light has turned into a benchmark product in the field of industrial lighting by virtue of its safety, efficiency and durability. Enterprises need to combine the explosion proof grade, installation environment and optical requirements, choose the approved certification of the regular brand [such as Amasly, etc.]. For more detailed technical parameters or customized solutions, please refer to the sources cited in the article or contact the professional manufacturers for assistance.